ShoreTel IP100 Spezifikationen Seite 71

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 388
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 70
Trunk Planning and Ordering
Planning and Installation Guide 5 – 3
Teleworker voice switches. Your organization may already have these installed,
and want to use them instead of ordering new loop-start trunks. If you have
Centrex lines and do not want to change your primary company telephone
number, you can keep Centrex lines. Centrex lines support Caller ID. Be sure to
remove the Centrex features, including call waiting, call forward, and voice mail.
Digital Loop-Start Trunks
Digital loop-start trunks are supported on the ShoreGear-T1 voice switch. These trunks
are typically used for inbound calls to the main telephone number that are directed to
an auto-attendant menu, company operator, or workgroup. A caller can route a call
from the auto-attendant to a user extension by entering the extension number or by
spelling the user’s name from the telephone keypad. Digital loop-start trunks are also
used to make outbound calls.
Digital loop-start trunks support:
Inbound calls
Outbound calls
Caller ID number
Caller ID name
Caller ID blocking
Digital provisioning is provided by the loop-start protocol and Dual-Tone Multi-
Frequency (DTMF) signaling. The ShoreGear-T1 supports ESF or D4 framing formats
and B8ZS or AMI line coding.
Analog Wink-Start Trunks (Analog DID)
Analog wink-start trunks are supported on the ShoreGear-120/24, ShoreGear-40/8,
ShoreGear-60/12, and ShoreGear-Teleworker voice switches. These trunks allow
external callers to dial a user’s phone number directly, without having to use an auto-
attendant or operator. Analog wink-start trunks support only inbound calls; they are
not capable of handling outbound calls.
Analog wink-start trunks support:
Inbound calls (outbound calls are not supported)
ANI
DID
DNIS
Analog provisioning is provided by the wink-start protocol and Dual-Tone Multi-
Frequency (DTMF) signaling.
If ANI is being used, the star (*) key must be used to delimit the ANI digits from the
DID/DNIS digits—that is:
<DID>
<DNIS>
*<ANI>*<DID/DNIS>*
Seitenansicht 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 387 388

Kommentare zu diesen Handbüchern

Keine Kommentare