ShoreTel IP100 Spezifikationen PDF herunterladen (Seite 337)

Planning and Installation Guide C – 1

PPENDIX

IP Phone Configuration

ShoreTel IP phones are preconfigured by ShoreTel to work in conjunction with your

ShoreTel 6.1 system and your network’s Dynamic Host Configuration Protocol

(DHCP)

server. Once the servers are configured, you simply plug the phones into the network

and they are automatically added to your ShoreTel 6.1 system.

The ShoreTel server provides the IP phones with the latest application software and the

configuration information that enables the IP phone to be automatically added to the

ShoreTel 6.1 system. The ShoreTel server’s address must be provided to the phone as a

vendor-specific option.

For information on configuring DHCP for the IP phones, see “Configuring DHCP for

ShoreTel IP Phones” on page 9-16.

However, if you are installing ShorePhone IP phones in a network without a DHCP

server, you must set the IP parameters manually through the phone interface.

Manually Configuring the ShorePhone-IP100

The setup menu is accessible when the ShorePhone-IP100 phone boots. You can enter

this menu during a six-second period, after which the phone enters normal operation

using the current settings.

NOTE Please check the ShoreCare website for Product Bulletin ST-0201 End of Life

documentation for this model.

Rebooting the ShorePhone-IP100

There are two ways to reboot the ShorePhone-IP100:

• By reapplying power

• By pressing four of the phone’s keys simultaneously

The IP phone reboots whenever power is reapplied. You can accomplish this by

disconnecting the power cable momentarily and then reconnecting it.

1 2 ... 332 333 334 335 336 337 338 339 340 341 342 ... 387 388

Keine Kommentare

ShoreTel IP100 Spezifikationen Seite 337