ShoreTel IP100 Spezifikationen Seite 214
- Seite / 270
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Specifications – SG 1-U Half-Width Switches Chapter C: ShoreGear Switches
206
• Maximum IP Phone Resources: 50 devices
— Analog Port Reallocation: 30
— Built-in Resources: 20
C.2.3.2 LED Descriptions
Power LED
The ShoreGear 50 has one power LED, which indicates the following:
• On: The switch is operating normally.
• Off: The switch has no power.
• Flashing
— 2 flashes—The switch failed its internal self-test. This indicates a hardware failure;
replace the unit and submit a Return Material Authorization (RMA) to ShoreTel,
Inc.
— 3 flashes—Booting via FTP. Flash memory might be corrupted. Go to the Quick
Look page to ensure that the system is running properly.
— 4 flashes—The IP address is unavailable. DHCP and BOOTP did not respond to the
IP address request, and the IP address is not available in nonvolatile memory to
continue boot process. The switch will automatically reboot in five seconds and try
again. Check the BOOTP/DHCP server and the network configuration to ensure
that the voice switch is receiving a valid IP address.
— 5 flashes—The operating system is not available. The switch is booting from FTP
but cannot find the boot files. It automatically reboots in five seconds. You can use
BOOTP or DHCP to tell the switch where the files are. If you are using BOOTP, set
the BOOTP server to the IP address of the ShoreWare server, and set the boot file to
/tsk/vxworks. If you are using a DHCP server that supports options 66 and 67,
set option 66 to the ShoreWare server’s IP address, and set option 67 to /tsk/
vxworks.
— 6 flashes—Using a previously stored IP address. A BOOTP/DHCP transaction was
attempted, but the BOOTP/DHCP server did not respond. The switch continues to
use the IP address stored in nonvolatile memory until it receives a valid response. If
Figure C-4 ShoreGear 50 Front Plate
Default
Switch
Audio Output Port
(night bell)
Power
LED
Network
LEDs
LAN 2
Connector
RS-232C
Maintentance
Port
RJ-21X
Te l c o Po r t
Status
LED
Audio Input Port
(music on hold)
Network
LEDs
LAN 1
Connector
- Maintenance Guide 1
- ShoreTel 1
- Trademarks 2
- Version Information 2
- Company Information 2
- Table of Contents 3
- CHAPTER 6: IP ENDPOINTS 97 5
- APPENDIX A: EVENT CODES 143 6
- Introduction 9
- ShoreTel Architecture 11
- 2.1.4.1 Personal Call Manager 12
- ShoreTel Maintenance Guide 5 13
- 2.3.1 Call Control 15
- ShoreTel Maintenance Guide 9 17
- 2.3.2 Configuration 18
- 2.3.3 TAPI 19
- 2.3.4 Media 20
- 2.4 System Reliability 21
- 2.5 Call Scenarios 23
- ShoreTel Maintenance Guide 17 25
- 2.6 Reference 26
- ShoreTel Maintenance Guide 19 27
- ShoreTel Maintenance Guide 21 29
- ShoreWare Servers 31
- ShoreTel Maintenance Guide 25 33
- 3.1.5 Media Communications 35
- 3.1.6.1 Voice Mail 36
- ShoreTel Maintenance Guide 29 37
- 3.2 Maintenance 38
- 3.3.1 Installer Logging 39
- 3.3.2 Using Quick Look 40
- 3.3.3 Using the Event Log 40
- 3.3.4 Using the System Logs 40
- 3.3.4.1 Graphical Application 41
- ShoreTel Maintenance Guide 35 43
- 3.3.6 Using TapiTest 47
- 3.3.7 Using the cfg Utility 47
- 3.3.8 Using Dr. Watson 49
- • Dump Symbol Table 50
- • Dump All Thread Contexts 50
- • Append to Existing Log File 50
- 3.4 Reference 51
- ShoreTel Maintenance Guide 45 53
- 3.4.3 Registry 55
- 4.2 Maintenance 58
- 4.2.2.1 IP Address from DHCP 59
- 4.2.2.6 Boot Flags 63
- • Speed: 19.2 kbps 64
- • Data bit: 8 bits 64
- • Stop bit: 1 64
- • Parity: No parity 64
- • Flow Control: None 64
- 4.2.4.1 ipbxctl Utility 65
- 4.3 Diagnostics 66
- ShoreTel Maintenance Guide 61 69
- ShoreTel Maintenance Guide 63 71
- ShoreTel Maintenance Guide 65 73
- Record2File2 (1, 60, “test”) 73
- • Speed: 19.2 Kbs 75
- IP560g 4.1 W 7.1 W 3 76
- IP565g 4.2 W 6.9 W 3 76
- Model Idle Maximum PoE Class 76
- Voicemail Model Switches 77
- ShoreTel Maintenance Guide 71 79
- 5.2.2 Switch Utilities 80
- ShoreTel Maintenance Guide 73 81
- 5.2.3 Server Utilities 82
- 5.3 Booting and Restarting 83
- 5.3.3 Reboot Methods 84
- 5.4 Diagnostics and Repair 85
- 5.4.4 Using Traceroute 86
- ShoreTel Maintenance Guide 79 87
- 5.5 Reference 88
- • Option 4 89
- • Ctrl-c 89
- • ? or help 90
- ShoreTel Maintenance Guide 83 91
- 5.5.3 CLI 95
- Table 5-2 CLI Commands 96
- ShoreTel Maintenance Guide 89 97
- 5.5.4 Cfg Utility 99
- 5.5.5 UBOOT 100
- 5.5.6 Burnflash 101
- 5.5.7 ipbxctl 101
- 5.5.8 regedit 102
- • Voice Mail Registry Keys 103
- 5.5.9 ShoreWare File System 104
- IP Endpoints 105
- 6.1.1.2 IP Phone Failover 106
- 6.1.1.3 Services 106
- ShoreTel Maintenance Guide 99 107
- 6.2 Maintenance 108
- 6.3 Diagnostics 108
- 6.3.2 Onscreen Error Messages 109
- Table 6-3 IPDT Functions 112
- 530/560/560g 115
- Table 6-5 Phone models 116
- 6.4.2.2 Parameter definitions 117
- Source Abbreviation in Table 118
- DHCP ACK DHCP 118
- 6.4.4.2 Parameter Precedence 125
- 6.5.1 SoftPhone 131
- 6.6 Reference 132
- Interface 133
- • Volume – 134
- • Volume + 134
- 6.6.3.3 Menu Options 135
- ShoreTel Client Applications 139
- 7.2 Diagnostics 140
- 7.2.1.2 Login Problems 141
- Client>tapitest 143
- Command Description 145
- 7.2.7 Using the History File 146
- 7.2.8 Using Log Files 146
- 7.3 Reference 147
- 7.3.3 The Setup Wizard 148
- Event Codes 151
- A.2.2 About Severity Levels 152
- A.3 Switches 153
- Chapter A: Event Codes TMS 163
- Table A-3 Event Codes: TMS 163
- TMS Chapter A: Event Codes 164
- A.5 Voice Mail 170
- A.6 TDI Media 175
- A.7 Event Watch 177
- A.9 Port Mapper 179
- A.10 Trigger Server 180
- A.12 Kadota Utility 182
- A.13 Call Accounting 183
- A.14 Workgroup Server 184
- A.15 CSIS 185
- DCOM Permissions 191
- B.2.1 My Computer Properties 192
- B.2.4 TMSManager2 Properties 197
- B.2.5 ZinManager Properties 199
- ShoreGear Switches 203
- C.2.2.1 Switch Capacity 210
- • Analog Circuit Resources 210
- • Digital Circuit Resources 210
- C.2.2.2 LED Descriptions 211
- • Flashing 211
- C.2.3.1 Switch Capacity 213
- C.2.3.2 LED Descriptions 214
- C.2.4.1 Switch Capacity 216
- • Status LED (Green) 218
- • Status LED (Yellow) 218
- • Off: No ports are assigned 218
- C.2.6.1 Switch Capacity 223
- C.2.6.2 LED Descriptions 224
- C.2.7.2 LED Descriptions 227
- C.2.9.2 LED Descriptions 233
- ShoreGear 249
- C.4.2.1 Switch Capacity 252
- C.4.3.1 Switch Capacity 255
- C.4.4.1 Switch Capacity 262
- C.5.1 IPBX-24 Voice Switch 265
- C.5.2.1 LED Descriptions 268
Verwandte Produkte und Handbücher für Telefone ShoreTel IP100
Telefone ShoreTel BB24 Bedienungsanleitung
(11 Seiten)
(11 Seiten)
Telefone ShoreTel IP100 Bedienungsanleitung
(2 Seiten)
(2 Seiten)
Telefone ShoreTel BB24 Installationsanleitung
(12 Seiten)
(12 Seiten)
Telefone ShoreTel IP100 Spezifikationen
(388 Seiten)
(388 Seiten)
Telefone ShoreTel 565g Installationsanleitung
(14 Seiten)
(14 Seiten)
Telefone ShoreTel AP110 Bedienungsanleitung
(2 Seiten)
(2 Seiten)
Telefone ShoreTel BB24 Bedienungsanleitung
(12 Seiten)
(12 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.499 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern