ShoreTel 8000 Installationsanleitung

Stöbern Sie online oder laden Sie Installationsanleitung nach IP-Telefone ShoreTel 8000 herunter. ShoreTel 8000 Installation guide Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 15
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
ShoreTel Requirements
ShoreWare Server Software, ShoreTel 6.1 or higher.
The following build numbers are required:
- ShoreTel 6.1 : Build 11.15.3203.0 or higher
- ShoreTel 7.0 : Build 12.5.8101.0 or higher
- ShoreTel 7.5 : Build 12.12.6113.0 or higher
Versions prior to this release will not support the IP8000
conference phone
ShoreTel SIP Trunk licenses are required
A total of 2 SIP trunk licenses is strongly recommended.
This will support Call Transfers. A single SIP trunk license
will only support basic inbound and outbound calls.
Note: To optimize performance of the IP8000 conference
phone, be sure to consult Application Note ST-10026
“ShorePhone IP8000 Conference Phone: Best Practices”
IP8000 Conference Phone Configuration Guide
This application note provides the details on adding the IP8000 conference phone to the ShoreTel IP
phone system. This information applies to ShoreTel Release 6.1, 7.0 and 7.5.
Application Note
ST-10010
October 25, 2007
Overview
This document describes how to integrate the IP8000
conference phone into the ShoreTel IP Phone System.
Note: This information pertains to ShoreTel releases 6.1,
7.0 and 7.5 which will allow the conference phone to
connect by way of “SIP trunks”. This means that not all call
features are available to the conference phone. However,
the features required for everyday conference room use are
supported including the ability to make and receive calls,
basic call transfer, initiate a 3 party conference call as well
as be a participant in a 6 party conference call.
Requirements
The following requirements are necessary to integrate a
IP8000 conference phone to the ShoreTel IP Phone system
as described in this Application Note.
Table of Contents
Overview
Requirements
ShoreTel Requirements
Conguration Overview
ShoreTel Conguration
ShoreTel System Settings - General
Call Control Settings
Sites Settings
ShoreTel System Settings - Allocating Ports for
SIP Trunks
Switch Settings - Trunk Group
ShoreTel System Settings - Individual Trunks
IP8000 Conguration
Initial Conguration
Retrieving IP Address
Connecting to the IP8000 Web Interface
General Conguration
SIP Conguration
Firmware Upgrades
1
1
1
2
2
2
2
3
4
4
9
10
10
10
10
12
13
14
Seitenansicht 0
1 2 3 4 5 6 ... 14 15

Inhaltsverzeichnis

Seite 1 - Application Note

ShoreTel Requirements ShoreWare Server Software, ShoreTel 6.1 or higher. • The following build numbers are required: - ShoreTel 6.1 : Build 11.15.32

Seite 2 - ShoreTel Configuration

IP8000 Conference Phone Application Note—Page 10From the individual trunks “Edit Trunk” screen, input a name for the individual trunks, select the app

Seite 3 - Sites Settings

IP8000 Conference Phone Application Note—Page 11The default password is “1234” unless changed earlier during initial conguration. Once the password h

Seite 4

IP8000 Conference Phone Application Note—Page 12Figure 20 – Preferences/Appearance ScreenGeneral ConfigurationThe following conguration steps are not

Seite 5

IP8000 Conference Phone Application Note—Page 13SIP ConfigurationNavigate to the Preferences/SIP/Server section of the menu as shown in Figure 21 and

Seite 6

IP8000 Conference Phone Application Note—Page 14Firmware UpgradesShould it be necessary to upgrade the rmware in the IP8000, the following process is

Seite 7

Issue Author Reason for Change Date2.0 D. Rencken Updated for ST 7.5 Sept. 25, 2007Figure 23 – Upgrade File Se

Seite 8

IP8000 Conference Phone Application Note—Page 2Call Control Settings The Call Control Options within ShoreWare Director may need to be recongured. To

Seite 9 - Figure 17 – Edit Trunk

IP8000 Conference Phone Application Note—Page 3Within the “Call Control Options” screen conrm that theappropriate settings are made for the “Enable S

Seite 10 - IP8000 Configuration

IP8000 Conference Phone Application Note—Page 4Switch Settings - Allocating Ports for SIP Trunks The nal general settings to congure are the ShoreGe

Seite 11 - Figure 18 – Login Screen

IP8000 Conference Phone Application Note—Page 5This selection brings up the “Trunk Groups” screen (Figure 8). From the pull down menus on the “Trunk G

Seite 12 - General Configuration

IP8000 Conference Phone Application Note—Page 6The next item on this screen is the “Enable Digest Authentication” eld. This is a SIP feature that all

Seite 13 - SIP Configuration

IP8000 Conference Phone Application Note—Page 7The next item to change for the SIP trunk groups is the outbound trunk conguration (Figure 11). Figu

Seite 14 - Firmware Upgrades

IP8000 Conference Phone Application Note—Page 8The next item to change is under “Trunk Digit Manipulation” (Figure 12). Typically when sending digits

Seite 15 - Record of Change

IP8000 Conference Phone Application Note—Page 9When it is desired to translate an off system extension to a 10 digit DID “Digit Translation” must be u

Kommentare zu diesen Handbüchern

Keine Kommentare